AC2Wiki.info

	Universal Camshaft Bearing Tool This tool has two sets of rubber sleeves supplied with it for each expanding driverRange of 1.1 25 to 2.69 (28.58 - 68.
Advance Auto Parts   –  $262.99 similar

	Lisle 30950 Cv Joint Banding Tool For All Band-It; and Band-It Jr.; Style Clamps. Works on all CV joints using the Band-It or Band-It Jr. type boot bands.
Walmart US   –  $9.50 similar

	Lisle 25000 6 Piece Rear Disc Brake Caliper Tool For rotating pistons back into the caliper to provide clearance for new pads Includes 5 adapters for both 2 and 4-wheel rear disc brake assemblies Tool may be used on or off the car Helps prevent damage to the piston and boot.
Walmart US   –  $59.75 similar

	Lisle CV Joint Banding Tool - LIS30950 For All Band-it and Band-it Jr. Style Clamps Use 5/8 socket or wrench to wind and crimp new band on boot Tool is easily disengaged from the band after the band is tightened Skin-packed. Shipping wt. 5 oz.
Advance Auto Parts   –  $14.59 similar

	Lisle LS44480 Finger Twist Hose Clamp Tool Large Tool are used to relieve clamp spring pressure in very tight spots- Vise is often left in place, with the clamp compressed, during service- Ramp on jaws guides tab of clamp into correct position and traps it in the slot for safety- Tighten knurled knob by SKU: EGLE8088.
Walmart US   –  $22.70 similar

	Cv Joint Banding Tool For Band-It And Band-It Jr. Clamps Works on all CV joints using Band-It and Band-It Jr. type boot bands. Use 5/8 socket or wrench to wind..
Auto Barn   –  $14.95 similar

	4-WD Wheel Bearing Lock Nut Tool The 4-WD Wheel Bearing Lock Nut Tool is for 4-slot applications. drive. Not for use with impact wrench..
Auto Barn   –  $19.95 similar

	GM Fuel Module Disconnect Tool Disconnects the fuel module on 98 and later GM full size pickups, Suburban and TahoeThe 2 piece design allows access to the connectorsFits both 3/8 and 5/16 connector sizesWill also fit all other 3/8 and 5/16 applicationsShipping wt. 1 oz. Slide the proper size end into the connector. Then rotate and slide the other half in place.
Advance Auto Parts   –  $8.99 similar

Fuel Line and Air Conditioning Disconnect Tool Set Easily disconnects air conditioning lines and quick connect fuel linesSet of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning lineAlso works on fuel line quick connect couplings found on GM, Ford, and Chrysler.The 5/16 size fits on push lock connectors found on Ford radiators and transmission linesEasy to use in confined spaces Set includes six sizes: 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8...

Advance Auto Parts   –  $12.79 similar

	Lisle 6.6L Duramax Flywheel Locking Tool Locks flywheel in place when removing harmonic balancer on 6.6L Duramax Engines with Allison Automatic...
Auto Barn   –  $39.95 similar

	Lisle Left Hand Rear Disc Brake Caliper Tool Winds back the rear disc piston to provide clearance for new brake pads Newer Ford applications....
Auto Barn   –  $35.95 similar

	Lisle Import Car Brake Clip Tool Designed for import cars with brake shoe hold-down clips. Removes and install the brake clip and nail...
Auto Barn   –  $11.95 similar

	Lisle Ratcheting Serpentine Belt Tool Releases tension on serpentine belts with a spring loaded idler pulley Ratcheting head with....
Auto Barn   –  $64.95 similar

	Lisle Wheel Weight Tool Removes trims and installs clip-on wheel weights Tirelever and offset flat tip for removing....
Auto Barn   –  $26.95 similar

	Lisle Shock Absorber Tool For removing and installing shock nuts Fits most domestic models and some Ford OEM shock nuts....
Auto Barn   –  $14.97 similar

	Lisle 77260 Harmonic Balancer Pulley Damper Holding Tool For Honda Designed with a 4;; offset for holding the damper when removing and installing the crank bolt on many Honda and Acura engines Designed with a 50mm outer hex and large center opening to fit impact sockets Use with a 1/2;; drive ratchet or breaker bar to hold the damper in place.
Walmart US   –  $26.53 similar

	Lisle Rear Disk Brake Piston Tool The Lisle Rear Disk Brake Piston Tool rotates the piston back in the caliper when replacing brake pads....
Auto Barn   –  $11.95 similar

	Lisle Air Conditioner/Fuel Line Disconnect Tool Set The Lisle Air Conditioner/Fuel Line Disconnect Tool Set easily disconnects air conditioning lines and....
Auto Barn   –  $8.99 similar

	Lisle Inner Tie Rod Tool The Inner Tie Rod Tool works on the tie rods with inaccessible wrench flats. This tool utilizes 5 crows...
Auto Barn   –  $74.95 similar

	Lisle Clutch Alignment Tool Lisle Clutch Alignment Tool Makes clutch replacement is faster and easier Aligns clutch....
Auto Barn   –  $21.95 similar

	Lisle Serpentine Belt Tool Releases tension on serpentine belts with a spring loaded idler pulley Used to remove and install....
Auto Barn   –  $52.95 similar

	Lisle Universal Camshaft Bearing Tool Now one complete low cost set that will remove or insert camshaft bearings in nearly all engines from....
Auto Barn   –  $179.95 similar

	Steering Wheel Lock Plate Tool by Lisle The steering wheel lock plate tool fits Domestic Lock Plates including tilt and telescoping. It depresses...
Auto Barn   –  $19.95 similar

	Lisle Rear Disc Brake Caliper Tool For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads. Includes 5 adapters available...
Auto Barn   –  $89.95 similar

	Lisle Large Inner Tie Rod Tool Works on inner tie rods with inaccessible wrench flats on many trucks and SUVs The long socket slips....
Auto Barn   –  $94.95 similar

	Lisle 22100 Flywheel Locking Tool For 6.6l Duramax Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission.
Walmart US   –  $32.11 similar

Lisle Flywheel Locking Tool for 6.6L Duramax - LIS22100 Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions Saves time by locking the flywheel at the transmission instead of having to remove the starter On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission.

Advance Auto Parts   –  $54.49 similar

Lisle Hub Removal Tool for New Large Dodge - LIS39250 Separates the frozen hub assembly from the steering knuckle on Dodge vehicles Tool drives against loosened retaining bolts to separate Prevents damage to the knuckle and complete hub assembly Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed For 2003 and newer 4-wheel drive 3/4 ton and 1 ton Dodge pickups. Most Steering Column Components products are available for in-store pickup from Advance Auto Parts...

Advance Auto Parts   –  $25.99 similar

	Lisle Carburetor Adjusting Tool For adjusting idle/mixture screws on many GM and Chrysler vehicles with carburetors. Includes ...
Auto Barn   –  $14.95 similar

	Lisle Metric Clutch Alignment Tool Metric Clutch replacement and repair is faster and easier with the Metric Clutch Alignment Tool. Tool...
Auto Barn   –  $12.97 similar

Lisle Large Inner Tie Rod Tool - LIS54500 Fits a lot of newer trucks and SUVs Fits both domestic and import Longer socket than the 45750 fits newer trucks and SUVs Of this style inner tie rod tool, the only one on the market Patent design has a retainer ring that makes sure the wrench won't slip Removes and installs inner tie rods with inaccessible wrench flats on many trucks and SUVs. Fits Toyota, Nissan, Ford, Lincoln, Mercury, and Chevrolet truck and SUV applications. Four crowsfoot sizes 33.6mm, 1-7/16, 38.

Advance Auto Parts   –  $108.99 similar

	Lisle 59800 Serpentine Belt Tool Serpentine Belt Tool - 59800. This tool is used to remove and install belts on serpentine belt systems using the. spring loaded idler pulley. Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and.
CPO   –  $37.99 similar

	Lisle 62300 Strut Tool Strut Tool - 62300. This is an inexpensive, but super safe strut spring compressor. Fits all strut spring sizes, import and domestic. Heavy duty clamps and bolts securely hold spring during operation.
CPO   –  $47.99 similar

Lisle Metric Clutch Alignment Tool - LIS61750 A tapered cone to fit all others is provided Clam shell package Built durable, made to last For faster, easier replacement or repair of metric clutches, this is the answer. This tool consists of the shaft, ten pilot bushings and two plate alignment cones with graduated turned diameters for automatic fit of most metric clutch plates. It's simple to use and easy to store. Most Clutch Components products are available for in-store pickup from Advance Auto Parts.

Advance Auto Parts   –  $30.49 similar

Lisle 55500 Clutch Alignment Tool features and benefits: two turned sizes (1; and 1-1/8;) fit 90 percent of the clutch plates the tapered cone handles the rest faster, easier replacement of clutchesworried about replacing and aligning your clutch?; you will have no worries when using this tool.; it aligns the clutch plates and pilot bearings accurately.; also the shaft and bushings provide an accurate fit for eight pilot bearing sizes. This is a great set to have, saves time and makes the job easier.

Walmart US   –  $20.68 similar

	Lisle 45750 Inner Tie Rod Suspension Tool Tube - 45770. Retainer - 45810. 33.6mm Crows Foot - 45670.
CPO   –  $54.99 similar

	Lisle 54500 Large Inner Tie Rod Tool Large Inner Tie Rod Tool - 54500. Works on inner tie rods with inaccessible wrench flats on many trucks and SUVs. The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation. This tool comes with four crows feet, sizes 1-7/16 in.
CPO   –  $57.99 similar

Lisle 59000 Ratcheting Serpentine Belt Tool features and benefits sockets are low profile to fit hard to reach areas ratcheting head has a freewheel position that allows maximum leverage comes with extension for hard-to-reach idler pulleys used to remove and install belts on serpentine belt systems spring loaded for a great performanceserpentine ratchet is used to release tension on the serpentine belts with a spring loaded idler pulley. It will work where conventional ratchets or breaker bars won't fit due to limited access. Tool includes a 19mm socket for honda and toyota applications..

Walmart US   –  $53.59 similar

	Windshield Locking Strip Tool Two Double-Ended Tips to Fit Most All Applications. Unique design allows tip to swivel 90 degrees in...
Auto Barn   –  $17.95 similar

	Dual Overhead Cam Lock Tool Locks Camshaft Sprockets in Place During Belt / Chain Replacement. This versatile tool easily locks and...
Auto Barn   –  $34.95 similar

	Combination 4-WD Wheel Bearing Lock-Nut Tool Combination tool for both 4-slot and 6-slot applications. 1/2 drive. Not for use with impact wrench..
Auto Barn   –  $26.95 similar

Clutch Alignment Tool Two turned sizes (1 and 1-1/8) fit 90 percent of the clutch platesThe tapered cone handles the restFaster, easier replacement of clutches Worried about replacing and aligning your clutch? You will have no worries when using this tool. It aligns the clutch plates and pilot bearings accurately. Also the shaft and bushings provide an accurate fit for eight pilot bearing sizes. This is a great set to have, saves time and makes the job easier.

Advance Auto Parts   –  $34.99 similar

	Steering Wheel Lock Plate Tool Fits all domestic lock plates, including tilt and telescoping columnsComes with standard and metric adapters for most all domestic lock platesSkin-packedShipping wt. 15 oz. This unique tool depresses lock plate for easy removal of lock ring. It allows access to steering column for repair work.
Advance Auto Parts   –  $28.49 similar

Ratcheting Serpentine Belt Tool Sockets are low profile to fit hard to reach areasRatcheting head has a freewheel position that allows maximum leverageComes with extension for hard-to-reach idler pulleysUsed to remove and install belts on serpentine belt systemsSpring loaded for a great performance Serpentine ratchet is used to release tension on the serpentine belts with a spring loaded idler pulley. It will work where conventional ratchets or breaker bars won't fit due to limited access. Tool includes a 19mm socket for Honda and Toyota applications..

Advance Auto Parts   –  $97.99 similar

	Serpentine Belt Tool Fits tensioner pulleys with 13mm - 16mm, 18mm hex or 3/8 and 1/2 square drivesFor hard to access tensioners; there are 13mm and 15mm, 12 point wrenches built into the handle13mm, 14mm and 15mm crowsfoot wrenches also included.
Advance Auto Parts   –  $78.99 similar

Inner Tie Rod Tool New crow's foot added, now includes 1-1/2 crow's foot for Chevrolet Colorado and GMC CanyonWorks on the inner tie rods with inaccessible wrench flats Many inner tie rod end sockets do not have a complete hex on the full length of the socket. The rounded socket ends prevent access to the wrench flats. The 45750 tool utilizes six crow's feet, sizes 1-1/2, 1-3/16, 1-1/4, 1-5/16, 1 7/16 and 33.6mm, to engage the wrench flats.

Advance Auto Parts   –  $108.99 similar

	6 Piece Rear Disc Brake Caliper Tool For rotating pistons back into the caliper to provide clearance for new padsIncludes 5 adapters (available individually) for use in both 2 and 4-wheel rear disc brake assemblies of most domestic and import carsTool may be used on or off the carA real time saver that makes this tough job easyHelps prevent damage to the piston and bootShipping wt. 4 lb. 8 oz..
Advance Auto Parts   –  $116.99 similar

	Lisle Adjustable Oil Filter Wrench For Trucks and Tractors. Fits John Deere Case Caterpillar Mack Detroit Diesel and others. Tough stainless..
Auto Barn   –  $18.95 similar

	Lisle Fold-Up Creeper The padded vinyl creeper adds comfort and protection on the job Works great on off road situations....
Auto Barn   –  $36.95 similar

	Lisle 3" Swivel Grip Oil Filter Wrench The Lisle Oil Filter Wrench features a a swivel handle making it easy to turn filters in hard to reach....
Auto Barn   –  $8.49 similar